The BFT Pillar B automatic bollard is designed for the defense of high-security areas (churches, airports, barracks). In the event of a power outage, the shaft of the bollard lowers automatically. Made with strong AISI304 or AISI316 stainless steel, this model built is to withstand an excessive amount of force. With a powerful hydraulic operator, this model is capable of a rise time of 5.0 seconds or less. The Pillar B is capable of enduring varying weather conditions as a result of its operating ampient temperature of -40°F - 140°F (with heater).

This bollard has met various standards of:

2004/108/CEE; 93/68/CEE (EN55104-1; EN55014-2) - Electromagnetic Compatibility

2006/95/CEE; 93/68/CEE (EN60335-1(2002)) - Low Voltage

2006/42/CEE ( EN60204-1 ) - Machinery Directive

99/5/CEE ( ETSI EN 301 489-3 (2002) + ETSI EN 301 498-1 (2005); ETSI EN 300 220-2 (2006)) - Radio set (tested with the electronic control unit PERSEO CBD or PERSEO CBE)

Features:

Buried Structure: ~Ø13.15 x h. ~41.73 in.

Foundation: Concrete

Excavation: ~39.37 x ~39.37 x ~55.12 in.

Break-In Resistance: 250,000 J

Driven Rod Treatment: AISI304 or AISI316 stainless steel

Passive Visibility: Reflective film ~3.94 in. (optional)

Flange: Cast-Iron, cataphoresis black

Top Cover: Cast-Iron, cataphoresis black

Acutator: Hydraulic

Power: 230 Vac ± 10%, 50-60 Hz

Working Time: Rise Time: 5.0 s (50 Hz); Lowering time: 6.5 s (50 Hz)

Working Temp: -40°F; - 140°F; (with heater)

Operating Humidity: Up to 100%

IP Grade: IP67

Hand operation:

-Standard: Bollard will open

-Security: Bollard will remain up

Lower the bollard by means of a solenoid valve which is accessible from the ground flange.

Electrical Features:

Control Unit: PERSEO CBD or PERSEO CBE

Power: 1-Phase 230 Vac ± 10%, 50-60 Hz (115 Vac with optional adapter)

IP Grade: IP54

Working Temperature: -40°F; - 140°F;

Operating Humidity: up to 95%, non-condensing

Use: Max. 4 for each control unit. Parallel control wiring possible for driving many groups of bollards.

Power Absorbed: 0.50 kW for each bollard

Power Consumption: 28 W for each bollard

Signalling (optional): On the top with high intensity LEDs, and buzzer(12 Vac)

Sensors: Open passage, Close passage (PERSEO CBE), Overpressure/Obstacle, Antitampering switch (optional)

Local/Remote Control: Control Options

Digital inputs

Radio remote control